Canagliflozin (JNJ 28431754) is a selective SGLT2 inhibitor with IC50s of 2 nM, 3.7 nM, and 4.4 nM for mSGLT2, rSGLT2, and hSGLT2 in CHOK cells, respectively.
For research use only. We do not sell to patients.
Canagliflozin Chemical Structure
CAS No. : 842133-18-0
This product is a controlled substance and not for sale in your territory.
MCF-7 and ZR-75-1 cells are exposed to Canagliflozin 0, 11, 33, and 100 μM for 24 h and protein levels of p-AMPK, total AMPK, p-p70S6K1 and total p70S6K1 are detected using immunoblot assay.
PFK2 expression is significantly increased by LPS but is attenuated by Canagliflozin (CAN).
Powered by Bioz
See more details on Bioz
Description
Canagliflozin (JNJ 28431754) is a selective SGLT2 inhibitor with IC50s of 2 nM, 3.7 nM, and 4.4 nM for mSGLT2, rSGLT2, and hSGLT2 in CHOK cells, respectively[1].
IC50 & Target
SGLT2
In Vitro
Canagliflozin inhibits Na+-dependent 14C-AMG uptake in CHO-hSGLT2 cells, with an IC50 of 4.4±1.2 nM. Similar IC50 values are obtained in CHO-rSGLT2 and CHO-mSGLT2 cells (IC50 = 3.7 and 2.0 nM for rat and mouse SGLT2, respectively). Canagliflozin inhibits 14C-AMG uptake in CHO-hSGLT1 and mSGLT1 cells with IC50 of 684±159 nM and >1,000 nM, respectively[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Canagliflozin Related Antibodies
In Vivo
Canagliflozin (30 mg/kg treatment for 4 weeks) reduces blood glucose (BG) levels, respiratory exchange ratio, and body weight gain in DIO mice[1].
Canagliflozin (3 mg/kg for 3 weeks) increases urinary glucose excretion (UGE) with no significant change in total food intake compared with that in vehicle-treated rats, leading to a decrease in body weight In ZF rats[1].
MedChemExpress (MCE) has not independently confirmed the accuracy of these methods. They are for reference only.
Room temperature in continental US; may vary elsewhere.
Storage
Powder
-20°C
3 years
4°C
2 years
In solvent
-80°C
2 years
-20°C
1 year
Solvent & Solubility
In Vitro:
DMSO : ≥ 50 mg/mL (112.48 mM; Hygroscopic DMSO has a significant impact on the solubility of product, please use newly opened DMSO)
*"≥" means soluble, but saturation unknown.
Preparing Stock Solutions
ConcentrationSolventMass
1 mg
5 mg
10 mg
1 mM
2.2496 mL
11.2481 mL
22.4962 mL
5 mM
0.4499 mL
2.2496 mL
4.4992 mL
10 mM
0.2250 mL
1.1248 mL
2.2496 mL
View the Complete Stock Solution Preparation Table
*Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles. Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
For the following dissolution methods, please ensure to first prepare a clear stock solution using an In Vitro approach and then sequentially add co-solvents:
To ensure reliable experimental results, the clarified stock solution can be appropriately stored based on storage conditions. As for the working solution for in vivo experiments, it is recommended to prepare freshly and use it on the same day. The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution. If precipitation or phase separation occurs during preparation, heat and/or sonication can be used to aid dissolution.
Protocol 1
Add each solvent one by one: 5% DMSO 40% PEG300 5% Tween-80 50% Saline
Solubility: ≥ 2.5 mg/mL (5.62 mM); Clear solution
Protocol 2
Add each solvent one by one: 5% DMSO 95% (20% SBE-β-CD in Saline)
Solubility: ≥ 2.5 mg/mL (5.62 mM); Clear solution
Protocol 3
Add each solvent one by one: 10% DMSO 40% PEG300 5% Tween-80 45% Saline
This protocol yields a clear solution of ≥ 2.08 mg/mL (saturation unknown).
Taking 1 mL working solution as an example, add 100 μLDMSO stock solution (20.8 mg/mL) to 400 μL PEG300, and mix evenly; then add 50 μL Tween-80 and mix evenly; then add 450 μL Saline to adjust the volume to 1 mL.
Preparation of Saline: Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution.
Protocol 4
Add each solvent one by one: 10% DMSO 90% (20% SBE-β-CD in Saline)
This protocol yields a clear solution of ≥ 2.08 mg/mL (saturation unknown). If the continuous dosing period exceeds half a month, please choose this protocol carefully.
Taking 1 mL working solution as an example, add 100 μLDMSO stock solution (20.8 mg/mL) to 900 μLCorn oil, and mix evenly.
Protocol 6
Add each solvent one by one: 1% DMSO 99% Saline
Solubility: ≥ 0.5 mg/mL (1.12 mM); Clear solution
For the following dissolution methods, please prepare the working solution directly.
It is recommended to prepare fresh solutions and use them promptly within a short period of time. The percentages shown for the solvents indicate their volumetric ratio in the final prepared solution.
If precipitation or phase separation occurs during preparation,
heat and/or sonication can be used to aid dissolution.
Protocol 1
Add each solvent one by one: 50% PEG300 50% Saline
Solubility: 10 mg/mL (22.50 mM); Clear solution; Need ultrasonic
In Vivo Dissolution Calculator
Please enter the basic information of animal experiments:
Dosage
mg/kg
Animal weight (per animal)
g
Dosing volume (per animal)
μL
Number of animals
Recommended: Prepare an additional quantity of animals to account for potential losses during experiments.
Please enter your animal formula composition:
%
DMSO+
%
+
%
Tween-80
+
%
Saline
Recommended: Keep the proportion of DMSO in working solution below 2% if your animal is weak.
The co-solvents required include: DMSO,
. All of co-solvents are available by MedChemExpress (MCE).
, Tween 80. All of co-solvents are available by MedChemExpress (MCE).
Calculation results:
Working solution concentration:
mg/mL
Method for preparing stock solution:
mg
drug dissolved in
μL
DMSO (Stock solution concentration: mg/mL).
The concentration of the stock solution you require exceeds the measured solubility. The following solution is for reference only. If necessary, please contact MedChemExpress (MCE).
Method for preparing in vivo working solution for animal experiments: Take
μL DMSO stock solution, add
μL .
μL , mix evenly, next add
μL Tween 80, mix evenly, then add
μL Saline.
Dissolve 0.9 g sodium chloride in ddH₂O and dilute to 100 mL to obtain a clear Saline solution
If the continuous dosing period exceeds half a month, please choose this protocol carefully.
Please ensure that the stock solution in the first step is dissolved to a clear state, and add co-solvents in sequence. You can use ultrasonic heating (ultrasonic cleaner, recommended frequency 20-40 kHz), vortexing, etc. to assist dissolution.
[1]. Liang Y, et al. Effect of canagliflozin on renal threshold for glucose, glycemia, and body weight in normal and diabetic animal models. PLoS One. 2012;7(2):e30555.
[Content Brief]
[1]. Liang Y, et al. Effect of canagliflozin on renal threshold for glucose, glycemia, and body weight in normal and diabetic animal models. PLoS One. 2012;7(2):e30555.
Complete Stock Solution Preparation Table
*Please refer to the solubility information to select the appropriate solvent. Once prepared, please aliquot and store the solution to prevent product inactivation from repeated freeze-thaw cycles. Storage method and period of stock solution: -80°C, 2 years; -20°C, 1 year. When stored at -80°C, please use it within 2 years. When stored at -20°C, please use it within 1 year.
Optional Solvent
ConcentrationSolventMass
1 mg
5 mg
10 mg
25 mg
DMSO
1 mM
2.2496 mL
11.2481 mL
22.4962 mL
56.2404 mL
5 mM
0.4499 mL
2.2496 mL
4.4992 mL
11.2481 mL
10 mM
0.2250 mL
1.1248 mL
2.2496 mL
5.6240 mL
15 mM
0.1500 mL
0.7499 mL
1.4997 mL
3.7494 mL
20 mM
0.1125 mL
0.5624 mL
1.1248 mL
2.8120 mL
25 mM
0.0900 mL
0.4499 mL
0.8998 mL
2.2496 mL
30 mM
0.0750 mL
0.3749 mL
0.7499 mL
1.8747 mL
40 mM
0.0562 mL
0.2812 mL
0.5624 mL
1.4060 mL
50 mM
0.0450 mL
0.2250 mL
0.4499 mL
1.1248 mL
60 mM
0.0375 mL
0.1875 mL
0.3749 mL
0.9373 mL
80 mM
0.0281 mL
0.1406 mL
0.2812 mL
0.7030 mL
100 mM
0.0225 mL
0.1125 mL
0.2250 mL
0.5624 mL
Canagliflozin Related Classifications
Help & FAQs
Do most proteins show cross-species activity?
Species cross-reactivity must be investigated individually for each product. Many human cytokines will produce a nice response in mouse cell lines, and many mouse proteins will show activity on human cells. Other proteins may have a lower specific activity when used in the opposite species.
